List of tested materials - Cura

The following materials have been experimentally tested and characterized for use with SmartSlice for Cura.

The following materials were added in the 21.0 release of SmartSlice:

  • 3DXTECH 3DXMAX® ASA
  • Arkema FluorX (Kynar® 826)
  • Braskem FL105PP
  • Jabil PA 0600
  • taulman3D Alloy 910

The following materials were added in the 20.2 release of SmartSlice:

  • Fiberthree PA-CF Pro
  • Fiberthree PA-GF Pro
  • igus GmbH iglidur® I150 
  • igus GmbH iglidur® I180
  • Jabil PA 4535 CF 
  • Jabil PETg 0800 ESD
  • MatterHackers NylonG 
  • MatterHackers NylonX 
  • Polymaker PolyMide™ PA6-CF 
  • Polymaker PolyMide™ PA6-GF 

The following materials were added in the 20.1 release of SmartSlice:

  • 3D Universe Nylon Carbon Fiber

  • 3DXTECH CarbonX™ CF-Nylon Gen 3

  • BASF 3D-Printing Solutions PAHT CF15
  • BASF 3D-Printing Solutions Ultrafuse PET
  • Essentium PCTG
  • Jabil Engineered Materials PA 4035 CF
  • Jabil Engineered Materials PETg
  • LEHVOSS Group LUVOCOM 3F PAHT 9825
  • LEHVOSS Group LUVOCOM 3F PAHT 9936
  • LEHVOSS Group LUVOCOM 3F PAHT CF 9742
  • LEHVOSS Group LUVOCOM 3F PET CF 9780
  • Polymaker PolyMide CoPA
  • Ultimaker ABS
  • Ultimaker CPE
  • Ultimaker CPE+
  • Ultimaker Nylon
  • Ultimaker PC
  • Ultimaker PLA
  • Ultimaker Tough PLA

The following Generic materials are supported:

  • Generic ABS (same properties as Ultimaker ABS)
  • Generic CFF CPE*
  • Generic CFF PA*
  • Generic CPE (Ultimaker CPE)
  • Generic CPE+ (Ultimaker CPE+)
  • Generic GFF CPE*
  • Generic GFF PA*
  • Generic Nylon (Ultimaker Nylon)
  • Generic PC (Ultimaker PC)
  • Generic PLA (Ultimaker PLA)
  • Generic Tough PLA (Ultimaker Tough PLA)

*properties for these materials are derived from similar materials that have been tested

Tip: In order to use a material with SmartSlice, install the material profile from the Cura Marketplace.

Learn more about material selection here.